GB
32
1� Make sure that the installation location has the same temperature influence on the connec-
ted batteries� Allow the batteries to self-equilibrate for at least one hour after fully charging
and connecting�
2� Monitor the battery status regularly with the Bluetooth app�
3� If there is a difference in SoC (State of Charge), temperature, voltage, etc�, disassemble
the as battery system of the parallel / series connection and perform maintenance on each
battery immediately�
4� The purpose of parallel connection is to increase the capacity, not to increase the dischar-
ge current, and generally higher capacity batteries are recommended to avoid connecting
multiple batteries�
Always refer to the data sheets of the respective batteries to
determine the maximum possible number of batteries! If possi-
ble, use a battery with a higher capacity instead of connecting
several batteries together.
NOTE!
To Next Page
