9.1. Alarm display and confirmation options
Option 1: Alarm indication “all alarms”
With this option the alarms will be visible on the display with an alarm symbol for 30 days.
By pressing the READ button, the warning symbol will be disabled for the corresponding alarms. The
alarm symbol cannot be canceled nor reset.
Note:
• In this mode only one upper and one lower alarm will be triggered per day.
• The alarm symbol will be present on the display for 30 days.
• The warning symbol can be deactivated by confirming all existing alarms in the readout mode.
Option 2: Alarm indication “unconfirmed alarms”
The alarms are shown with the alarm symbol until all alarms (in the 30-day history) have been
confirmed as solved by pressing the READ button. Afterwards the display will show the OK symbol
until a new alarm is triggered.
Berlinger & Co. AG User Manual Fridge-tag - 1
Page 29 of 51
To Next Page
Loading...
