berlinger Fridge-tag 2 E - Configuring Alarm Limit Parameters

6.6. Setting the alarm limits (not standard,
only if preset by factory)
This adjustment is done in 4 steps:
1. Setting the duration of the upper alarm limit
2. Setting the temperature of the upper alarm limit
3. Setting the duration to the lower alarm limit
4. Setting the temperature of the lower alarm limit
1. and 3. Setting the HI and LO alarm durations, they are completed in the same manner
The 1st digit of the
duration of the alarm
limit is flashing.
1. Press
READ to
adjust the
number.
2. Press
SET to
confirm
the
number.
The 2nd digit of the
duration of the alarm
limit is flashing.
1. Press
READ to
adjust the
number.
2. Press
SET to
confirm
the
number.
Berlinger & Co. AG User Manual Fridge-tag - 1
Page 16 of 51