berlinger Fridge-tag 2 E - Temperature Record Duration (Optional Factory Setting)

10.5. Temperature record duration (optional
factory setting)
Selectable record duration: 30, 60 days.
Note: File names on the Fridge-tag are write protected. The names may only be changed after
downloading the files onto a computer. Changing is either possible directly on unopened files or via open
and save commands with Adobe Reader. Using other programs may cause loss of the digital signature.
Date: Date of measurement
Event: t Time/date changed
Event: a Alarm configuration changed
Event:
hh:mm
Time stamp: status checked
Average
temp.
Average temperature
Status: in
progress
The data collection “Today” is not yet complete
Status: OK
No alarm has been triggered in the past 30 days. (No alarm has yet been triggered since the
data was read out on the device.*)
Status:
Alarm
Alarm(s) have been triggered (With means that the details of the corresponding alarm
have not been read out yet.*)
Status:
Alarm
Alarm(s) have been triggered (Without means that the details of the corresponding alarm
have already been read out on the device.*)
Min. temp. Lowest recorded temperature
Cum.
duration
Cumulative daily time below/above the limit
Alarm
trigger time
Time at which the alarm was triggered
Max. temp. Highest recorded temperature
Duration Duration of an external sensor connection error
*For more information go to chapter Alarm trigger function
Berlinger & Co. AG User Manual Fridge-tag - 1
Page 43 of 51