berlinger Fridge-tag 2 E - Page 20

The 3rd digit of the
duration of the alarm
limit is flashing.
1. Press
READ to
adjust the
number.
2. Press
SET to
confirm
the
number.
The 4th digit of the
duration of the alarm
limit is flashing.
1. Press
READ to
adjust the
number.
2. Press
SET to
confirm
the
number.
The duration of the alarm limit is now set.
2. and 4. Setting the HI and LO alarm temperatures, they are completed in the same manner
First you have to choose the range of the desired temperature limit. You have the choice between
negative and positive temperatures. In case of a positive limit in Fahrenheit you may further choose if
the limit shall be equal or above +100°F. This choice is done by repeatedly pressing READ until the
desired range is indicated.
Note: The temperature measurement unit (°C/°F) can only be changed after the device is activated in
the menu. Learn more: Read and change settings / How to correct setting mistakes.
Instruction for setting a positive temperature limit between 0°C/0°F and +50°C/+122°F (internal
Internal sensor: Alarm temperature limits must be no lower than –20°C (–4°F) and no
higher than +50°C (+122°F).
External sensor: Alarm temperature limits must be no lower than –35°C (–31°F) and no
higher than +55°C (+131°F).
!
Berlinger & Co. AG User Manual Fridge-tag - 1
Page 17 of 51