The following additional information is indicated on the screen:
• Highest recorded temperature (example: +10.5˚C)
• The duration of the exceedance of the preset high temperature limit (example: 11:24; hh:mm.)
• Temperature recording in this example with internal sensor
Note: Press the READ button again for at least 3 seconds and the next alarm event will appear on the
screen.
Display of the next alarm event
Note: Press the READ button again for 3 seconds to jump to the next alarm event. And so on.
Note: Pressing SET in the „Read out Mode“ brings you back to the „Measurement Mode“.
Berlinger & Co. AG User Manual Fridge-tag - 1
Page 38 of 51
To Next Page
Loading...
