Bernette Funlock B42 - How to Open Looper Cover; Principal Parts Behind the Looper Cover; Preparation to Sewing; Power Switch

 9
OFF
ON
2
1
1
2
OFF
ON
2
1
1
2
OFF
ON
2
1
1
2
Principal Parts behind the Looper
Cover
PREPARATION TO SEWING
HOW TO OPEN LOOPER
COVER
(1) Standard presser foot
(2) Chainstich /Coverstitch looper
Power Switch
– Connect the controller/electric plug to the
machine receptacle.
– Plug power line into electric outlet.
– Push " l " mark side to turn "ON"
– Push "O" mark side to turn "OFF"
1. Push the looper cover to the right as far as it will
go.
2. Pull looper cover down toward you.
CAUTION:
Be sure to turn off power switch.
CAUTION:
Be sure looper cover is closed when sewing.