35
Optional Cover Presser Feet
• Elasticator Foot
– The Elasticator foot guides and stretches the
elastic as it is being sewn on. Ideal for lingerie,
swimwear, sportswear and home textiles.
• Standard Presser Foot with clear sole
– The clear sole affords the perfect view of your
sewing project. It is ideal for decorative seams
which have been previously tailor-tacked, as
well as for positioning at the beginning or end of
a seam.
• Cording Foot and Guide
– This presser foot guides decorative and fine
cords of up to 2 mm thickness exactly and
precisely below the coverstitch seam as they
are being sewn on. Alternatively, it can also be
used to create and insert piping.
• Lace Foot
– For sewing lace, trim and tapes onto hems. The
bottom edge of the fabric is simultaneously
neatened with a narrow or wide coverstitch,
creating a flat joining seam.
• Binder Attachment for unfolded bias tape
– The binder attachment creates practical edge
finishes with unfolded bias tape in a width of 25
to 28 mm. Self-cut bias tape can also be used
for a professional look.
• Hemmer Foot
– The hemmer foot quickly and easily sews even
seams with a depth of 2.5 cm. A narrow or wide
coverstitch can be used to neaten the cut edge.
• Belt-loop Foot
– The belt-loop foot is used to fold bias or straight
binding, which it then quickly and easily turns
into straps or belt loops with the cover- or
chainstitch.
• Hemmer and Lace Foot
– This presser foot sews tapes or lace below a
fabric edge, which is simultaneously folded to
form a hem. A coverstitch neatens both edges
at the same time, whilst the material is folded by
1 cm.
To Next Page
Loading...
