Bernette Funlock B42 - To Insert Needle(S)

 13
To Insert Needle(s)
– Hold the needle with the flat surface (1) to the
back.
– Insert the needle into the needle socket as far
as it will go.
– When inserting a needle, if you first lower it
down into the hole in the stitch plate it will line
up with the needle socket. Then direct it
upwards.
This machine uses ELx705 needles.
Do not use Standard Household Needles.
C
D
E
D
DCE
E
D
C
C
D
E
1
2
3
PLEASE NOTE:
When inserting needles into a sockets (C-E) it
is necessary to loosen (3) all Allen Screws.
After inserting the needles equally tighten all
Screws (2).