Bernette Funlock B42 - Machine Maintenance; Cleaning the Machine; Oiling the Machine

 33
A
Oil
A
Oil
MACHINE MAINTENANCE
Cleaning the Machine
Oiling the Machine
– Clean the lint from the looper and needle plate
area often with a dry lint brush.
– The oiling points shown in the diagram, should
be oiled periodically.
CAUTION:
Before cleaning your machine, disconnect
power line plug from the wall receptacle.
CAUTION:
Before lubricating your machine, disconnect
power line plug from the wall receptacle.
PLEASE NOTE:
Use only sewing machine oil. Do not use any
other oil or damage could result.