10
052815
Workbook 4—Embroidery Basics
Small Hoop
40mm x 40mm
(approx. 1.6” x 1.6”)
bernette Hoops
deco 340 Hoops
Standard: Medium (A), Large (B)
Optional: Small Free-Arm (C), Round (F)
bernette Chicago 7 Hoops
Standard: Large
Optional: Medium, Small
Attaching and Removing deco 340 Hoops
Fit the pins into the carriage holes.
Turn the attaching knob clockwise so it is parallel
with the hoop to lock in place.
Large Hoop B
140mm x 200mm
(approx. 5.5“ x 8”)
Medium Hoop A
110mm x 126mm
(approx. 4.25” x 5”)
Free-arm C
50mm x 50mm
(approx. 2” x 2”)
Round Hoop F
Large Hoop
110mm x 170mm
(approx. 4.5” x 6.7”)
Medium Hoop
100mm x 100mm
(approx. 4” x 4”)
Attaching and Removing Chicago Hoops
Raise the presser foot.
Place the embroidery hoop under the presser foot
To attach the embroidery hoop, slide the hoop
connector into the hoop securing lever from front
to back until it clicks.
To remove the hoop, press the snap-on
embroidery hoop holder down and pull the hoop
toward you smoothly and carefully.
To Next Page
Loading...
