Bernina Bernette Series User Manual

12
052815
Workbook 4—Embroidery Basics
Hoop Calibration
Adjusting the Hoop Reference Position
This process calibrates the needle to the center of the hoop.
The Oval, Mega, Maxi & Jumbo Hoops need to be calibrated when they are new to the machine and after
every update. Calibration is essential because the variance of the basting box is only a couple a millimeters
when selected to go around the hoop edge. For the most accuracy in calibration, have fabric hooped (project
or stabilizer), use the template with hoop holders attached lay the template on the ‘fabric’ and calibrate.
Having fabric in the hoop takes the play out of the field when using the template with nothing hooped.
BERNINA 560, 580, 750 QE
BERNINA 770 QE, 780, 790, 880
B 560, 580, 750 QE, 770 QE, 780, 790, 880
 Touch Setup Program icon.
 Select Embroidery Setting option
 Select Calibrating Embroidery Hoop icon and
desired hoop
 Place embroidery template into the large oval
embroidery hoop
 Start the adjustment by pressing the green
check; the hoop is checked and the needle
positioned to the center.
 If the needle is not positioned exactly in the
center of the template, it has to be centered by
using the arrow icons
 Confirm with the Green Check; the adjustment is
saved

Bernina Bernette Series Specifications

General

Stitch Patterns	Varies by model
Buttonhole Styles	Varies by model
Sewing Speed	Varies by model
Needle Positions	Varies by model
Free Arm	Yes
Stitch Count	Varies by model
Maximum Stitch Width	Varies by model
Maximum Stitch Length	Varies by model
Needle Threader	Varies by model
Stitches	Varies by model
Built-in Stitches	Varies by model
Automatic Features	Varies by model
Weight	Varies by model
Dimensions	Varies by model
Display	Varies by model
Model	Bernette Series
Presser Feet	Varies by model
Speed Control	Varies by model
Warranty	Varies by model
Feed Dogs	Adjustable