Bernina Bernette Series - Stitching a Design; Fabric Preparation for Stitching; Stitching on deco 340; Stitching on bernette Chicago 7

20
052815
Workbook 4—Embroidery Basics
Stitching A Design
Fabric Preparation
Deco 340, Chicago 7
Hoop a piece of firm woven fabric backed with tear-away stabilizer in the Large hoop.
5 Series, 7 Series, and 8 Series
Hoop a piece of firm woven fabric backed with tear-away stabilizer in the Large Oval hoop.
deco 340
 Select the indicated motif.
 Lower the presser foot and press the
start/stop button to start embroidery.
 The machine will stop after 5 stitches and
request the user to cut the thread tail.
 After trimming the thread tail, press the start/
stop button again to continue stitching.
 Change thread colors as prompted
onscreen.
 When the motif is complete, press the
Carriage to Front icon to return the carriage
to the stored position.
bernette Chicago 7
 From the Built-in Designs icon, select
Design 02, Jewel Flower.
 Lower the presser foot, and press the Start/
Stop button to stitch.
 Change thread colors as prompted
onscreen.
 When the motif is complete, a check mark
appears indicating that the stitching is
finished. Press the OK (check) button.
deco 340: 64 - floral border
2-color design
98mm x 34mm
Chicago: 12-Jewel Flower
2-color design
81mm x 95mm