Important
Ret
ed b
Mastersewusa.co
Dear customer
Congratulations on your choice!
Your Bernette Funlock 004D/004 is made to the highest standards. It will cut, sew and neaten for you in one smooth
operation giving a professional look to anything you make.
The 4 thread Bernette Funlock is particularly suited to sewing stretch fabrics. Let your wardrobe and home benefit
from the Bernette’s superb sewing qualities. Our comprehensive Instruction Manual introduces you step by step to
the joys of overlocking and also gives you some useful sewing tips.
We wish you many happy hours of overlocking pleasure.
Safety Regulations
The following safety regulations must be observed without fail: It is important to pay attention to the needle and knife
while sewing as these are potential sources of injury to fingers. Movements within the area of the needle, knife or
looper such as threading, changing needles or presser feet, or raising the knife, may only be done with the machine
switched off (power switch at “O”). When cleaning or lubricating the machine replacing the bulb or when sewing is
finished, machine should be disconnected from the electricity supply. All repair work, especially electrical repairs
(e.g. renewing the cable connection out by one of our authorized service agencies.
Please note:
Funlock 004 is not equipped with differential feed. All points relating exclusively to Funlock 004D are marked with
the symbol. ✱
1
To Next Page
Loading...
Need help?
General
