Threading
1. Upper looper thread, blue markings
Place the spool on the spool holder pin underneath the blue
marking on the thread guide.
(1) Bring thread up from spool and take it through the blue
guide.
(2,3) Make S-loop around thread guide bar.
(4) Thread guide.
(5) Thread tension dial.
(6,7,8,9,10) Thread guides
(11) Turn handwheel towards you until upper looper is in the
position illustrated. Thread looper eye.
(12) Lift presser foot, place thread underneath and lower
presser foot.
11
To Next Page
Loading...
