Settings, practical sewing
Rolled hem
•
Application: Edge finish
•
Stitch: 3 thread overlock, right needle.
• Stitch selection: roll hemming
• Thread: Darning thread, fine polyester thread, wooly nylon thread
(only in upper looper)
• Needle: 70/80
• Stitch length: 1-1.5
• Cutting width: 1-2
• Differential feed: 0.7-2
• Thread tension: Adjust the tension to suit the fabric and thread chosen.
The looper threads meet on the underside of the fabric. Lower looper
tension (red) 6-9, upper looper tension (blue) 2-5 and needle tension
(green) 4-7.
Narrow seam
• Application: Fine seams
• Stitch: 3-thread overlock right-hand needle.
• Stitch selection: roll hemming.
• Thread: Fine polyester thread, wooly stretch nylon in upper and lower
looper.
• Needle: 70/80
• Stitch length: 1,5-2,5
• Cutting width: 1-2
• Differential feed: N-2
• Thread tension: Adjust the tension according to fabric and thread
chosen. The loops formed by the loopers should meet exactly on the
edge of the fabric. Lower looper tension (red) 2-5. Upper looper
tension (blue) 3-6. Right-hand needle tension (green) 4-7.
22
To Next Page
Loading...
Need help?
General
