Settings, practical sewing
Presser foot pressure
he presser foot pressure is factory adjusted to a medium setting.
osition of knob for normal pressure (A).
ore pressure: for thick or stiff fabrics such as denim, tweed, firm
ess pressure: for lightweight or sheer fabrics and knits (C).
Roll Hemming
Turn the handwheel towards you until the needle are
• ing, pull the selection lever back to the
• push the selection lever forwards to
he roll hemmer is fully integrated in the machine. The
1
T
Should you wish to adjust it, simply turn the knob in the direction
desired:
P
M
linen (B).
L
•
fully raised.
For roll hemm
red marking on the stitch plate furthest from the
presser foot (D).
For overlocking,
the red marking on the stitch plate nearest the presser
foot (E).
T
edges of the fabric will be automatically rolled over
producing a very narrow, fine seam or hem. Roll
hemming is deal for finishing edges on all fine fabrics,
such as evening clothes, lingerie, scarves frills and also
for curtains and napkins.
2
To Next Page
Loading...
Need help?
General
