K44 Technical manual 11
Change password
1 Press B and enter the current password.
2 Enter A27.
3 Enter the new password. A warning tone is
heard.
4 Enter the new password once again.
5 Press B to leave programming mode.
6 Make a note of the new password and keep
it in safe place.
Programming the codes
1 Press B and enter the password.
2 Enter A21.
z
3 Enter the desired code location using two
digits (01-04 if K44 is in standard mode or
01-30 if K44 is in advanced mode).
Note! In the Standard mode or advanced
mode section you will find instructions on
how to change the setting between
standard and advanced mode.
4 Enter the entrance code for the chosen
code location (four digits for code
locations 01-20 or six digits for code
locations 21-30).
To Next Page
Loading...
