Need help?Do you have a question about the Bewator KC 5000 and is the answer not in the manual?
General| Brand | Bewator |
|---|---|
| Model | KC 5000 |
| Category | Door locks |
| Language | English |
Overview of the KC5000 system's capabilities and features.
Instructions on operating the KC5000 system directly.
Explains printer connection and types of information that can be printed.
Lists and describes the hardware components included with the KC5000 system.
Guidelines for physically installing the central unit and keypads.
Preparatory actions required before commencing system installation.
Step-by-step guide for wiring the various system components together.
Detailed diagram showing connections for keypads, locks, and power.
Illustrates system setup requirements using a practical scenario.
How to define and configure time zones for access control periods.
Configuration of individual door parameters and access logic.
Setting up, changing, and deleting user access codes.
Explanation of the functions of each button on the KC5000 keypad.
Describes the central unit's display screen and status indicators.
Procedure for setting the system's internal clock and calendar.
Detailed steps for programming new time zone intervals.
How to change existing programmed time zone settings.
Steps to remove programmed time zones from the system.
Instructions for entering new user access codes into the system.
Procedure for modifying previously entered access codes.
Steps to remove specific access codes from the system.
Adding new doors to the system configuration and their parameters.
Modifying settings for already programmed doors.
How to obtain a printed record of system events.
Selecting which types of events are recorded for printouts.
Establishing a security password for remote system access.
Overview and procedures for programming the system remotely via telephone.
Key considerations for successful and secure remote operations.
Remotely setting and updating the system's time and date.
Procedures for remotely adding or changing time zone configurations.
Steps for removing time zones remotely.
Procedures for remotely adding or changing access codes.
Steps for removing access codes from the system via remote access.
Procedures for remotely programming and changing door settings.
Technical specifications for the KC5000 central unit hardware.
Technical specifications for the M65 keypad hardware.
Template for recording remote time and date programming sequences.
Templates for recording remote time zone entry and modification data.
Template for recording remote time zone deletion sequences.
Templates for recording remote code entry, modification, and deletion.
Template for recording remote door configuration changes.
To Next Page
