4 KC5000 Technical manual — Introduction
KC5000 the intelligent code lock
KC 5000 is a code lock system for up to six doors. With a capacity of 99
codes and a built in timer with 99 time zones, which can be unique for
different doors, enables to handle different access levels for different groups.
For example can the postman’s code be limited to be valid only in daytime
on weekdays, but for the tenants the code can, for their own door be valid
for 24 hours and the whole week. For the caretaker the code can be valid for
24 hours the whole week and on all doors.
If wrong code is entered more than three times in a row the code lock enters
a “blocking stage”, which makes it almost impossible to crack the code. To
release the blockage you just enter a correct code twice in succession.
How to use
All programming is made directly in to the central unit with an easy step-by-
step instruction, but one feature with KC5000 is that it can be remote
programmed from an ordinary telephone. The big advantage with this is that
you don’t have to go to each central unit whenever you need to change the
information in the system – instead you just call up the system and change
the information from an ordinary telephone.
As an extra accessory the KC5000 can be supplied with PC software for
Windows (Windows 95), which makes it possible to programme the system
from a PC either directly or via modem.
Printouts
As standard a printer can be connected. This makes it possible to have
printouts on all programmed data, and also continuous printouts on valid
access and other system events. (See also the chapter Printouts).
To Next Page
Loading...