24 KC5000 Technical manual — Programming
Doors
This chapter describes how to program information about New Entry and
Changing doors.
Doors cannot be deleted from the system – only the information can be
changed. However, the information can be changed for any programmed
door using the Codes functions (see Changing codes).
New Entry of doors
Take out the Doors chart and program the information that should be valid
for each door.
1 Display the main menu and choose DOORS (3). The following text is
displayed:
1)
EDIT
2) PRINT
2 Choose EDIT (1). The following text is displayed:
WHICH DOOR?
(1-6)
3 Enter the door to program information for, e.g. 1 for the first door.
The following text is displayed:
OPENINGTIME?
(1-999) (7)
4 Enter the desired lock activating time (between 1-999 seconds), or keep
the pre-set time (7 seconds).
5 Press . The following text is displayed:
TIMEZONE F. DAYOPEN?
(0=DISABLED) (0)
To Next Page
Loading...
