16 KC5000 Technical manual — Programming
3 Enter the current time by typing hours and minutes in one sequence,
e.g. 0935. If no change is to be made to the time, go straight to step 4.
4 Press . The following text is displayed:
ENTER DATE 01-06-30
- -
5 Enter the current date by entering year, month and day in one sequence,
e.g. 010701. If no change is to be made to the date, go straight to step 6.
6 Press
. The main menu is displayed again.
Time zones
This chapter describes how to program information about New Entry,
Changing and Deleting time zones.
New Entry of time zones
Take out the Time zones chart and program the time zones that should be
valid in the building.
1 Choose TIMES (4) on the main menu. The following text is displayed:
1)
TIME OF DAY
2) TIME ZONES
2 Choose TIME ZONES (2). The following text is displayed:
1) NEW 2) EDIT
3) DELETE 4) PRINT
3 Choose NEW (1). The following text is displayed:
ENTER TIME (ZONE 01)
-
4 Enter between what hours the first time zone should be valid,
e.g. from 0000-2359 (24hours).
To Next Page
Loading...
