KC5000 Technical manual — Programming 17
5 Press . The following text is displayed:
ENTER VALID DAYS
0000-2359 [ ]
6 Choose which days the time zone should be valid. 1=Monday,
2=Tuesday etc. If the time zone should be valid the whole week,
press 1, 2, 3, 4, 5, 6 and 7.
If it only should be valid on Saturdays and Sundays, press 6 and 7.
If the wrong digit is entered by mistake, press the same digit again to
delete it.
7 Press . The following text is displayed:
ENTER TIME (ZONE 02)
-
8 Enter time interval and days for the next time zone in the same way, if
more time zones are needed.
Otherwise, press
Esc
EscEsc
Esc
to go back to the main menu.
Changing time zones
To change a programmed time zone, proceed as follows:
1 Display the main menu and choose TIMES (4). The following text is
displayed:
1)
TIME OF DAY
2) TIME ZONES
2 Choose TIME ZONES (2). The following text is displayed:
1) NEW 2) EDIT
3) DELETE 4) PRINT
3 Choose EDIT (2). The following text is displayed:
WHICH TIMEZONE?
(TIMEZONE
OR / )
To Next Page
Loading...
