KC5000 Technical manual — Programming 15
Display
In stand-by position, the following text is displayed:
01-06-10 15:40
PRESS
Today’s date and time are displayed.
Press . The main menu is displayed:
1) CODES 2) _ _ _ _ _
3) DOORS 4) TIMES
You can now choose what information to register, change or delete. If
nothing is entered within two minutes, the central unit reverts to stand-by
position.
Note! Press
Esc
EscEsc
Esc
to cancel a programming sequence already started.
Set time and date
Use this function to set the time and date.
When the system is delivered, time and date are already set, so normally
there is no need to change this information. Adjustment to daylight saving
time is done automatically on the last Sunday in March and the last Sunday
in October.
To change time and date, proceed as follow:
1 Display the main menu and choose TIMES (press 4). The following text
is displayed:
1)
TIME OF DAY
2) TIME ZONES
2 Choose TIME OF DAY (1). The following text is displayed:
ENTER TIME 13:35
:
To Next Page
Loading...
