KC5000 Technical manual — Preparations 11
Time zones
This is how to fill in the time zones you have chosen:
1. Take out the copy of the Time zones chart and write the number of the
first time zone, i.e. 1, under the Time zone heading.
2. Write down when the time zone starts and ends under the From and To
headings.
3. Under the Days heading, write which days the time zone should be
valid. (1=Monday, 2=Tuesday, 3=Wednesday etc.).
4. Write down information about the next time zone in the same way
(you can use up to 99 time zones).
Below is an example of a filled in Time zones chart the way it would look if
the above example were used:
Time zones
Time zone From To
Days
1 00.00 23.59 1234567
2 08.00 15.00 12345
3 05.00 10.00 1234567
Time zone 1 is used for the tenants’ access codes. The codes should work 24
hours a day all days. Time zone 2 is used for the postman’s code, days 1-5
i.e. Monday to Friday. And time zone 3 is for the newspaper boy’s code,
days 1-7 i.e. the whole week.
To Next Page
Loading...
