4 K44 Technical manual
What is K44?
K44 is a compact code lock designed for one
door. To open the door, a four-digit entrance
code is used (six-digit codes can be used in
advanced mode). All programming is done
using the keypad.
Timing the codes
K44 offers the possibility to time the codes
you have programmed via an external time
clock. This is useful if certain codes, e.g. the
cleaner's code, should only be valid certain
hours while the staff should have access to the
door 24 hours a day.
Connecting two time clocks to K44, you can
make use of three different time zones for code
timing: one controlled by time clock 1, one
controlled by time clock 2 and one valid 24
hours a day, i.e. no timing.
When programming the codes you should
determine to what time control group they
should belong.
0 = no timing, 1 = group 1 and 2 = group 2.
To Next Page
Loading...
