K44 Technical manual 13
Changing codes
1 Press B and enter the password.
2 Enter A22. Á
3 Enter the existing code. If it is a 4-digit
code, enter A after the last digit.
4 Enter the new code using four (standard
mode) or six digits (advanced mode).
5 Enter the new code once again.
6 If the code should not be timed, press 0.
Press 1 if the code should be timed from
time clock 1 - or 2 for time clock 2.
7 Change another code or press B to leave
code programming.
8 Press B to leave programming mode.
Set opening time
The opening time determines for how long the
lock should remain open following a correct
entrance code. When K44 is delivered the
opening time is 7 seconds for both relays.
1 Press B and enter the password.
2 Enter A28.
z
3 Enter the desired opening time (01-99)
using two digits, e.g. 09 for 9 seconds.
4 Press B to leave programming mode.
To Next Page
Loading...
