18 K44 Technical manual
Using K44
Entrance
To open the lock, a four-digit (or six-digit)
entrance code should be entered on the code
lock's keypad. When a correct code is entered
the lock opens. The lock will close again after
the time set as opening time.
K44 is blocked if a visitor performs 12 key
presses without managing to find a correct
entrance code. To release the blockage, enter a
correct code twice in succession.
Unlock the door permanently
To unlock the door permanently, proceed as
follows:
1 Press B. Á
2 Enter the code programmed for code
location 04.
3 Enter 1.
From now on the visitor does not have to enter
a code to open the door – the door is unlocked
(indicated by the green LED.
Whenever you want to lock the door again,
follow the instructions above; only enter 0 in
step 3 instead. The visitor now has to enter a
code to open the door.
To Next Page
Loading...
