Bewator K44 - Programming Overview

Programming overview
Always start by pressing B and entering the password. Exit: Press B.
Function Sequence Step 1 Step 2 Step 3 Step 4 Step 5
New entrance code A21 Enter code
location
(2 digits).
Enter code
(4 or 6
digits)
Enter timing
group (0, 1 or 2)
Program
new code or
press B
Change entrance code A22 Enter old code
using
4 (+A ) or 6 digits
Enter new
code using
4 or 6 digits
Enter new code
using 4 or 6 digits
Enter timing
group (0, 1
or 2)
Change another code
or press B
Change password A27 Enter new code
(6 digits)
Enter new
code again
Change opening time A28 Enter seconds
(01-99)
Buzzer on/off A65 0 = off 1 = on
Door open permanently A68 0 = off 1 = on
Duress on/off A69 0 = off 1 = on
Advanced mode on/off A99 0 = off 1 = on