16 K44 Technical manual
Duress on/off
With the duress function activated, a staff
member can enter a special code if he or she is
forced to open the door under theat. An alarm
signal is then transmitted to an alarm central,
the police or similar. When K44 is delivered,
the duress function is deactivated.
This is how to activate the duress function:
1 Press B and enter the password.
2 Enter A69.
z z
3 Enter 1.
4 Press B.
To deactivate the function, enter 0 in step 3
instead.
The Enter duress code section describes how a
user should enter the duress code.
Note! If Duress is activated, make sure you
have not programmed codes with
consecutive digits. Code 1234 must not exist
with codes 1235 and 1233. Code 5679 must
not exist with codes 5670 and 5678.
To Next Page
Loading...
