Need help?Do you have a question about the Bfb 3D Touch and is the answer not in the manual?
Ensures the print bed is clean and free of obstructions before printing.
Verifies the print bed is securely and properly installed.
Guides on leveling the print bed for consistent first layers.
Sets the correct Z height for the first layer.
Step-by-step guide to loading filament into the extruders.
Instructions for selecting and initiating a print job.
Procedure for precisely leveling printer nozzles.
General| Layer Resolution | 0.05-0.3mm |
|---|---|
| Nozzle Diameter | 0.4mm |
| Connectivity | USB, SD Card |
| Filament Diameter | 1.75mm |
| Supported Materials | PLA, ABS, TPU |
| Print Bed | Heated |
| Power Requirements | 110-220V, 360W |
To Next Page