Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail: bibo@ourbibo.com
Repetier-host is an open-source software, which has better function in windows
system than Mac, as most softwares. So we have cura, simplify 3D, printrun
and makerware for optional choose. Just let the machine setting and slicer
settings to be simillar to repetier host settings, and your printing will be
successful(slicer setting is very important for printings). Cura settings for BIBO
have been saved in SD card’s “BIBO maker touch cura settings” folder,
please kindly check them.
The settings we supply for you is just for reference. Different filament, different
structure of printing object or even different room temperature, will cause different
printing quality. So you can also set your filament settings or Print settings
according to different conditions. For every setting meaning, you can click the
frame and repetier-host will show what does this setting mean. Please
kindly check the photo below:
To Next Page
Loading...