Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail: bibo@ourbibo.com
The white colored lines are the support material and the blue lines are the object
itself.
Next to the object you see a square tower, this is used to clean the nozzle when
switching.
Now our new slicing settings add Ooze shield for dual extrusion. It can
catches any oozing from the unused nozzle in dual extrusion. Please take
this shield away after printing.
The setting is here:
The ooze shield is like this:
To Next Page
Loading...