Shaoxing Bibo Automatic Equipment Co., Ltd.
Tel:+86 575 88918283 Mobile:+86 133 25759139
Url: www.ourbibo.com E-Mail:
bibo@ourbibo.com
Resart the Cura, and you will see the blue mark before the machine name.
This means the printer is connected with the computer through Wifi. Please
kindly note that cura is not stable to control the printer through Wifi. We just
use Cura to transfer the gcode files to the printer.
We can open the gcode file or stl file in cura.
To Next Page
Loading...