Big Joe M22 - Sample of Operator Check List; Operator Checks

2-2 BL-M22EP-0119 - 01-11-2019
Table 2-1 Operator Checks
Figure 2-2 Sample of Operator Check List
ITEM PROCEDURE
Hydraulic System Check for signs of fluid leakage.
Forks Check for cracks and damage and that they are properly secured.
Chains, cables and hoses Check that they are in place, properly secured and not damaged.
Guards Check that safety guards are in place, properly secured and not damaged.
Safety signs Check that warning labels, nameplates, etc., are in good condition and legible.
Wheels Check wheels for cracks or damage. Move the truck to check load wheel and cast-
ers for freedom of rotation.
Lift and Lower Check operation of lift and lower to their maximum positions.
Floor Lock Check that the floor lock holds the truck stationary.
Lift Motor Check for grinding or laboring sounds.
R6734