Bignay Gi Fly - 5 Modifications and Refinishing

To Next Page

To Previous Page

Modications and renishing

Modications can cause damage which can increase the risk of failure and accident which may

result in serious injury or death. Renishing can hide structural damage, such as fatigue cracks or

structural problems which may also result in an accident.

There are many components and accessories available to enhance the comfort, performance, and

appearance of your bicycle. However, if you change components or add accessories, you do so

at your own risk. The bicycle’s manufacturer may not have tested the specic component or ac-

cessory for compatibility, reliability, or safety on your bicycle. Before installing any component or

accessory, including but not limited to a dierent size tire, a lighting system, a luggage rack, a child

seat, a trailer, etc., make sure that it is compatible with your bicycle by checking with your dealer

or with Bignay Inc. Be sure to read, understand, and follow the instructions that accompany the

products you purchase for your bicycle.

See also Appendix A for proper usage of your Gi Fly.

Do not modify or renish your Gi Fly or any of Gi Fly’s components

in any way. Such modications or renishing will void any applica-

ble warranty and could pose a serious threat to the rider.

Failure to conrm compatibility, properly install, operate, and

maintain any component or accessory can result in serious injury

or death.

Exposed springs on the saddle of any bicycle tted with a child

seat can cause serious injury to the child.

Changing the components on your bike with those other than

genuine replacement parts may compromise the safety of your

bicycle and may void the warranty. Check with your dealer or with

Bignay Inc. before changing any components of your bike.

Warning