EasyManua.ls Logo

Bignay Gi Fly - iii. Unfolding your Gi Fly - Beginner

Default Icon
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
cause when you rotate the left pedal to its most vertical point, the right pedal rotates
to its lowest point.
Engage the front break with your left hand and tilt the handlebar 45 degrees to the
right so that the left pedal does not interfere with the folding process (Img.14.D).
While engaging the front brake and maintaining the handlebar at a 45 degree, push
the bike forwards with both wheels on the ground. The front wheel will stay in place
while the folding joint bends, allowing the rear wheel to be brought forward (Img.14.E).
Then, once both wheels are in line with one another (Img.14.E), release the front brake,
engage the rear break with your right hand, and bring the front of the bike backwards.
Gently rest the bike on its two wheels and saddle (Img.14.F).
Push the button on the folding lever up and then press the folding lever down so that
it no longer protrudes from the frame (Img.14.G).
For further instruction please watch the following video: http://giybike.com/downloads/How-
to-fold-your-GiFly.mp4
Img. 14
4.
5.
6.
7.
8.
Open the bike’s folding lever by moving the small, stainless steel button located on
top of the lever upwards. (Img.15.A).
Stand on the left side of the bike with your left hand on the left handlebar and your
right hand on the right handlebar (Img.15.B).
1.
2.
ii. Folding your Gi Fly - Expert
34

Table of Contents