Tighten or loosen the belt drive adjustment screw (Img.35.i) in order to regulate the tension of
the belt.
The target tension for the belt drive is 45-53 lbs. If you don’t have the knowledge or the proper
tools to measure the tension of the belt, take it to a service center for proper handling.
Belts are extremely durable and oer long life when properly handled. However, caution must
be used before and during installation to avoid damaging the belt core. Excessive bending and
twisting creates invisible crimps, which can lead to belt breakage.
• Do not bend backwards.
• Do not use as a chain whip.
• Do not bundle.
• Do not crimp.
• Do not twist.
• Do not invert.
F — Solid tires
We designed Gi Fly to be used with the tires we provide. We do not
recommend you change these tires. All warranties will be voided if
you decide to change your tires.
Caution
Gi Fly is equipped with Tannus Tires Razor-
blades (www.tannustires.com). Gi Fly’s tires
are solid and are 100% puncture proof (Img.
37). They can withstand nails, glass, sharp
metal objects, and thorns with ease.
The tires will accumulate about 1 mm of
wear after riding 6,000 km (3700 miles). They
require no maintenance.
If you decide to change your tires we recom-
mend you bring the bike to your local bike
shop or contact Tannus Tires directly.
Img. 37
56
To Next Page
Loading...