39
Next, tighten the locking nut (marked as “i” in Img.19.C) to prevent the screw from
moving.
If there is still play between the front and rear parts of the frame, then you must
repeat steps 1-4, further tightening the folding mechanism’s adjustment screw.
If the folding lever gets trapped within the frame or if the lever becomes dicult to
move then you must slightly loosen the folding mechanism’s adjustment screw.
4.
5.
6.
Img. 19
In the case that you have followed these steps and there is still play
between the front and rear parts of the bike, then please take your
bike to a professional bicycle mechanic.
Caution
Do not ride your bike if there is play between the front and rear parts
of your Gi Fly.
Warning
To Next Page
Loading...