Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
27 / 39
5. BIGTREETECH CB1 Setup steps
5.1 Download OS Image
If BIGTREETECH CB1 core board is used, You can only download and install the
system image provided by BIGTREETECH:
https://github.com/bigtreetech/CB1/releases
5.2 Download and Install Raspberry Pi Imager
Install the official Raspberry Pi Imager: https://www.raspberrypi.com/software/
The system image of CB1 can also be written with this software.
5.3 Write OS Image
1. Plug the Micro SD card into the computer via a card reader.
2. Select Operating System.
To Next Page
Loading...
