SKR CR6 V1.0 mannul SHENZHEN BIGTREE TECHNOLOGY CO., LTD.
3 / 8
13) Support onboard SD card printing function
14) Onboard EEPROM (AT24C32)
15) Support RGB light bar
3. Specification
1) Appearance size: 118.6*80mm
2) Installation size: 105.4*73.6mm
3) Microprocessor: ARM 32-bit Cortex™-M3 CPU
4) Input voltage: DC12V--DC24V
5) Motor driver: TMC2209 onboard
6) Motor drive interface: X, Y, Z0, Z1, E
7) Temperature sensor interface: BED, T0
8) Display screen: BIGTREETECH-3.5 inch TFT, LCD12864, original screen
9) PC communication interface: Micro USB, easy to plug and unplug, communication
baud rate 115200
10) Expanded interface function support: detection of material interruption,
continuous operation after a power failure, shutdown after finishing, auto-leveling of
strain gauge.
11) Support file format: G-code
12) Support machine structure: CREALITY CR-6 SE
13) Recommended software: Cura, Simplify3D, pronterface, Repetier-host,
Makerware.
To Next Page
Loading...
Need help?
General
