BIGTREETECH SKR CR6 V1.0 User Manual

SKR CR6 V1.0 mannul SHENZHEN BIGTREE TECHNOLOGY CO., LTD.
8 / 8
8.Motherboard firmware description
1) Currently, only our open-source Marlin2.0 firmware is supported, and you can go
to our open source website to find the corresponding motherboard to download.
https://github.com/bigtreetech?tab=repositories
2) Marlin2.0 firmware update method:
After downloading our open-source Marlin2.0 firmware, use Visual Studio Code to
open the project to compile, then find the firmware.bin file, copy it to the SD card,
and then reset the motherboard and wait about 10 seconds. (You can also download
firmware.bin directly)
Please refer to the tutorial for detailed steps：
https://www.dropbox.com/s/ppjfflhf3j5yzh2/MarlinV2.0%20SKRV1.1%20instruction
.docx?dl=0
3) When using the original screen or other screens produced by our company,
different firmware needs to be programmed.
9. Precautions
1. The firmware currently only supports our open source Marlin2.0 firmware.
2. U disk function is not supported temporarily, so stay tuned!
3. When supplying 12V/24V power to the motherboard, be sure to pay attention to the
positive and negative poles of the power supply.
4. The name of the firmware file in the SD card cannot be changed, including case.
5. Before powering on, ensure that all wires and jumper caps are plugged in correctly
and completely.

BIGTREETECH SKR CR6 V1.0 Specifications

General

Brand	BIGTREETECH
Model	SKR CR6 V1.0
Category	Computer Hardware
Language	English