Billion BiPAC 8520 - Virtual Server (Port Forwarding)

Virtual Server (Port Forwarding)
Virtual Server allows you to direct incoming trafc from WAN side (identied by Protocol and External
port) to the Internal server with private IP address on the LAN side. The Internal port is required only
if the external port needs to be converted to a different port number used by the server on the LAN
side.
The device can be congured as a virtual server so that remote users accessing services such
as Web or FTP services via the public (WAN) IP address can be automatically redirected to local
servers in the LAN network. Depending on the requested service (TCP/UDP port number), the
device redirects the external service request to the appropriate server within the LAN network.
In TCP and UDP networks a port is a 16-bit number used to identify which application program
(usually a server) incoming connections should be delivered to. Some ports have numbers that are
pre-assigned to them by the IANA (the Internet Assigned Numbers Authority), and these are referred
to as “well-known ports”. Servers follow the well-known port assignments so clients can locate them.
If you wish to run a server on your network that can be accessed from the WAN (i.e. from other
machines on the Internet that are outside your local network), or any application that can accept
incoming connections (e.g. Peer-to-peer/P2P software such as instant messaging applications and
P2P le-sharing applications) and are using NAT (Network Address Translation), then you need to
congure your router to forward these incoming connection attempts using specic ports to the PC
on your network running the application. You also need to use port forwarding if you wish to host an
online game server.
143