Quick Start
Click Quick Start link to WAN Port setup pages. Please see the WAN section for detailed instructions
on conguring your WAN settings.
Usually, the information you will need for the Quick Start wizard to congure the connection is your
login name (often in the form of username@ispname), password and the encapsulation type. In
addition, you can provide a specic DNS or check the Enable box to get the DNS automatically from
your ISP.
Your ISP will be able to provide all the information you need. Alternatively, if you have deleted the
current WAN Connection through WAN > ISP page, you are allowed to use the router’s PVC Scan
feature to determine the Encapsulation types offered by your ISP.
47
To Next Page
Loading...
Need help?
General
