147
Edit One-to-one NAT
One-to-One NAT maps a specic private/local IP address to a global/public IP address. If you have
multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One NAT to utilize these
IP addresses.
NAT Type: Select the desired NAT type. As set in default setting, it disables the One-to-One NAT
function.
Global IP Address:
• Subnet: The subnet of the public/WAN IP address given by your ISP. If your ISP has pro-
vided this information, you may insert it here. Otherwise, use IP Range method.
• IP Range: The IP address range of your public/WAN IP addresses. For example, IP address:
192.168.1.1, End IP: 192.168.1.10.
Click Apply to conrm the settings.
Add a new rule
Check Add Entry to create a new One-to-One NAT rule. Please refer to Add Virtual Server section.
Global IP: Dene a public/WAN IP address for this Application to use. This Global IP address
must be dened in the Global IP Address.
Click Apply to conrm the settings.
To Next Page
Loading...
Need help?
General
