PPPoE Routed with Pass-through
To access PPPoE with Pass-through Connection, press Change > PPPoE Routed with Pass-
through.
PPPoE with pass-through adapts the following method: PPPoE Routed mode + 1483 Bridge
Mode. With pure PPPoE connection, the router can get one WAN address to the router. With the
PPPoE and PPPoE pass-through, concurrently, it allows user to have a WAN address assigned
to the router but also able to get another WAN IP from ISP using PPPoE dialer (e.g WinPoETor
Windows XP PPPoE Dialer) at the same time.
66
To Next Page
Loading...
Need help?
General
