MAIN MENU
Technical Help – Please contact the helpline on 0844 557 9677 12
Starting Up
Your dash camera will power on and start to record automatically as soon as it is
connected to power.
You can also power it on manually: Press the On/Off button for 1 second.
Your dash camera has been designed to be as simple to use as possible. The
purpose of a DVR is to continually record the road ahead and to automatically record
and save any incidents or accidents you might be involved in. To ensure that your
dash camera does this as efficiently as possible, it will always power up in to video
mode and begin recording automatically. Simply connect your dash camera to a
power source that comes on when you start the engine of your vehicle, and dash
camera will start recording automatically without you having to remember to press on
a button.
The following screens is displayed when the device power on.
Basic features
Your dash camera comes as standard with all features set to their optimum settings,
however the unit has certain user selectable features you can change to suit your
own requirements.
Entering the Setting menus
You can use the Menu button to enter the Settings menu and the Additional Settings
menu.
To Next Page
Loading...