MAIN MENU
Technical Help – Please contact the helpline on 0844 557 9677 24
6) ISO setting
ISO setting controls the sensitivity of your camera's sensor to a given amount of
light, but higher ISO settings affects image noise.
Press down button to select ISO menu, then press OK button, the following
screen is displayed. Press Up or Down button to select which you want, then
press OK button to confirm your selection and return to the menu.
If you selected “Auto”, device will adjust ISO level automatically, based on the
brightness of environment.
7) Exposure setting
Same as video exposure setting.
8) Anti-Shaking setting
Press down button to select Anti-Shaking menu, then press OK button, the
following screen is displayed. Press Up or Down button to select “Off” or “On”,
then press OK button to confirm your selection and return to the menu.
To Next Page
Loading...