13
BASE TELEPHONE Making and answering calls
It is possible to deactivate the microphone
during a conversation so you can speak without
being heard by the other person on the call.
» Press the MUTE button once
è While the mouthpiece is muted and the
handset is off hook or while the microphone is
muted in speakerphone mode, the
SPEAKERPHONE light flashes.
To get back to the call:
» Press the MUTE button again
To mute the
mouthpiece
or
microphone
To adjust the volume in the handset’s earpiece
or the loudspeaker in speakerphone mode:
Press the VOLUME +/– buttons
To adjust the
volume
To adjust the volume of the base telephone’s
ringer. In idle mode (not busy on a call):
1 Press and hold the VOL-/SET RINGER VOLUME
button to hear the current ring volume
2 Press the VOLUME +/– buttons to set your
desired ring loudness
è If there is no key pressed within 3 seconds,
the function leaves the programming mode and
the new ring volume will be saved automatically.
Remark: In case the volume level was initially
set to “OFF”, the base phone will still playback
the volume 1 ringer when user tries to program
the ringer volume again.
Ringer
volume
To change the base telephone’s ringer melody,
while the phone is idle (not busy on a call):
1 Press and hold the VOL+/SET RINGER
MELODY button to hear the current melody
2 Press the VOLUME +/– buttons to set your
desired ring melody
è If there is no key pressed within 3 secs, the
function leaves the programming mode and the
new ring melody will be saved automatically.
Ringer
melody
To Next Page
Loading...
