Binder 9010-0082 - Disposal; Disposal of the Transport Packing; Decommissioning; Disposal of the Chamber in the Federal Republic of Germany

BD / ED / FD (E2) 03/2019 page 36/68
10. Disposal
10.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Wooden transport box (option)
with metal screws
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling
Metal Metal recycling
Pallet (from size 115 on)
with foamed plastic stuffing (from
size 240 on)
Solid wood (IPPC standard) Wood recycling
Transport box
with metal clamps
Cardboard Paper recycling
Metal Metal recycling
Top cover (size 720 only) Cardboard Paper recycling
Removal
aid (sizes 240
and 400 only)
Cardboard Paper recycling
Plastic Plastic recycling
Edge protection Styropor
®
or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing of
optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
10.2 Decommissioning
Turn off ED chambers sizes 400 and 720 at the main power switch (10). Disconnect the chamber from
the power supply.
When turning off the main power switch (10), the stored parameters remain saved.
Tempo ral decom missioni ng: Se e indic atio ns for approp riate s tor age, chap. 3.3.
• Final decommissioning: Dispose of the chamber as described in chap. 10.3 to 10.5.
10.3 Disposal of the chamber in the Federal Republic of Germany
According to Annex I of Directive 2012/19/EU of the European Parliament and of the Council on waste
electrical and electronic equipment (WEEE), BINDER devices are classified as “monitoring and control
instruments” (category 9) only intended for professional use“. They must not be disposed of at public
collecting points.
The chambers bear the symbol for the marking of electrical and electronic equipment
manufactured / placed on the market in the EC after 13 August 2005 and be disposed of in
separate collection according to Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) and German national law for electrical and electronic equipment
(Elektro- und Elektronikgerätegesetz, ElektroG). WEEE marking: crossed-out wheeled bin
with solid bar under. A significant part of the materials must be recycled in order to protect
the environment.
DOMINIQUE DUTSCHER SAS